Peggy O Patch PatchMafia.com

Peggy-0 Patch

To use a heat press machine follow these steps:

Set your heat press machine to 360 – 370 degrees Fahrenheit
Place your patch on your garment in the desired location
Cover your patch with wax paper to protect it from the heat
With 40 PSI foam under your garment, apply pressure for about 18 seconds
Allow to cool and enjoy your new heat seal patches
Iron on Heat Seal Patches


To apply your heat seal patches with an iron,

simply follow these steps:

Set your household iron to the highest setting (typically Cotton)
Adjust your garment so it is flat on an ironing board
Lay a piece of cloth on top of your garment to protect it and prevent burning
Start by pressing the iron onto your garment to preheat the area. Hold firmly for approximately 10 seconds
Carefully place your heat seal patch in the desired location
Lay the piece of cloth over your patch so you don’t burn it and press as firmly as you can for another 60 seconds
Repeat the ironing process again to ensure the glue has adhered to the garment
Repeat the process listed above to the other side of your garment making sure to cover with the cloth as instructed
Let your garment sit undisturbed until the glue has time to cool and fasten gratefulPATCH.com